Cisco Headend System Release 2.5 Installation Guide
5-66
SR 2.5 and SR 3.5 Post Upgrade Procedures
78-738190-01 Rev B
Set the Clock on the TED (Optional)
Introduction
There is no requirement that the clocks on the DNCS and the TED match exactly.
The intent of this procedure is to synchronize the clocks so that log activity can be
easily compared.
Setting the Clock on the TED
Complete these steps to set the clock on the TED.
1.
From an xterm window on the DNCS, type su and then press Enter.
2.
Type the root password and then press Enter.
3.
Type date and then press Enter.
Result: The system date and time appear.
Result: The system date and time appear.
4.
Write down the system date and time in the space provided.
System Date: _________________________
System Time: _________________________
System Date: _________________________
System Time: _________________________
5.
Type rsh –l root dncsted and press Enter.
Note: The “l” is a lowercase L.
Note: The “l” is a lowercase L.
6.
Type in the root password and press Enter.
Result: You are logged into the TED as a root user.
Result: You are logged into the TED as a root user.
7.
Type date and press Enter.
Result: The TED date and time appear.
Result: The TED date and time appear.
8.
Compare the time results from step 4 with step 7. Do the time results match
the time zone where the equipment is physically located?
•
•
If yes, go to step 11.
•
If no, go to step 9.