Cisco Headend System Release 2.5 Installation Guide
78-738190-01 Rev B
SR 2.5 and SR 3.5 Post Upgrade Procedures
5-79
Set Up the RNCS,
Continued
3. Follow these directions to configure the Set Up VASP window.
a) For the VASP Type field, select MMM Server.
b) In the ID field, type a unique ID number.
c) In the Name field, type a meaningful name that you can use when
b) In the ID field, type a unique ID number.
c) In the Name field, type a meaningful name that you can use when
referring to the remote site.
d) In the IP Address field, type the IP address of the remote site.
e) In the Status field, click In Service.
f) In the Site ID field, type the number that you have used to identify this
e) In the Status field, click In Service.
f) In the Site ID field, type the number that you have used to identify this
site.
4. Repeat these instructions for each remote site that the system supports.
Examine and Re-Order the pddataqampat Table for the RNCS
The pddataqampat table on each RNCS may be out of order. Follow the procedures
in Examine and Re-Order the pddataqampat Table, earlier in this chapter, to
examine and re-order, if necessary, the pddataqampat table on each RNCS.