Cisco Headend System Release 2.5 Installation Guide
78-738190-01 Rev B
Basic System Functionality Tests
6-13
Modify DHCT Configuration
DHCT Configuration Modification Tests
Run the following tests to verify the ability to modify the configuration of the DHCT.
If the actual results differ from the stated results, note the differences and attempt to
troubleshoot the condition.
1.
Update the default DHCT global configuration file by changing the quick
settings values.
Note: Find the DHCT Config on the Server Applications tab. If no default
Note: Find the DHCT Config on the Server Applications tab. If no default
file exists, create one.
2.
After 3 minutes, verify that the quick settings on the DHCT match the new
ones you just entered in step 1.
Result: The settings match.
Notes:
Result: The settings match.
Notes:
3.
Turn on power to the DHCT and update the default DHCT configuration file
by changing the quick settings values.
4.
After 1 minute, verify that the quick settings on the DHCT match the new
ones you just entered in step 1.
Result: The settings match.
Notes:
Result: The settings match.
Notes:
5.
Turn off power to the DHCT and send an addressable configuration update to
the DHCT to change the power-on channel.
6.
Wait 1 minute and then turn on power to the DHCT.
Result: The DHCT tunes to the channel just specified as the new power-on
Result: The DHCT tunes to the channel just specified as the new power-on
channel.
Notes:
Notes: