Cisco Headend System Release 2.5 Installation Guide
78-738190-01 Rev B
SR 2.5 and SR 3.5 Upgrade Procedures
2-9
for the Enterprise 450 and Sun Fire V880 DNCS
Install the DNCS Software on an Enterprise 450 or Sun Fire V880 DNCS,
Continued
3.
Type y and then press Enter.
Result: A message appears that prompts you to confirm that you want to use
Result: A message appears that prompts you to confirm that you want to use
Live Upgrade.
4.
Type y and then press Enter.
Result: The message Are you going to use Cisco’s App Server? appears.
Result: The message Are you going to use Cisco’s App Server? appears.
5.
Choose one of the following options:
•
•
Type y and then press Enter if you are going to use Cisco’s Application
Server.
•
Type n and press Enter if you are not going to use Cisco’s Application
Server.
Results:
•
•
The system displays a message about generating a response file.
•
The system displays a list of configuration parameters similar to the
following example:
************************ Installation Configuration **********************
** **
** 0) INFORMIXSERVER = dncsDbServer **
** 1) DNCS_HOST = dncs **
** 2) BFS_HOST = dncs **
** 3) DNCSATM_IP = 10.253.6.1 **
** 4) APPSERVATM_IP = 10.253.6.10 **
** 5) DNCSTED_IP = 192.168.1.2 **
** **
****************************************************************************
Number to change ("0", "1", ...), "c" to continue, or "q" to quit:
6.
Follow these instructions regarding the configuration parameters that
appeared after executing step 5.
a) Examine the configuration parameters and follow the onscreen
a) Examine the configuration parameters and follow the onscreen
instructions to change any parameter that needs to be changed.
b) Type c and then press Enter when you are finished.
Results:
•
Results:
•
The system generates a response file.
•
The system displays a confirmation message about continuing with the
upgrade.