Cisco Headend System Release 2.5 Installation Guide
78-738190-01 Rev B SR 2.5 and SR 3.5 Upgrade Procedures for the Enterprise 250 DNCS
3-13
Restore the DNCS Database
Restoring the DNCS Database
After rebooting the DNCS, follow these instructions to restore the DNCS database.
1.
Insert the DBDS Maintenance CD into the CD drive of the DNCS.
2.
Type df -n and then press Enter.
Result: A list of the mounted filesystems appears.
Note: The presence of /cdrom in the output confirms that the system
Result: A list of the mounted filesystems appears.
Note: The presence of /cdrom in the output confirms that the system
correctly mounted the CD.
3.
Type /cdrom/cdrom0/s3/sai/scripts/Media/SAmenu and then press Enter.
Results:
•
Results:
•
The UniPack environment is established.
•
The system configuration is checked.
Note: It should take no longer than 5 minutes to complete the system check.
Important: If the script that checks system configuration takes longer than
Note: It should take no longer than 5 minutes to complete the system check.
Important: If the script that checks system configuration takes longer than
5 minutes to execute, something may have gone wrong. Contact Cisco
Services for assistance in troubleshooting the system check.
•
The SA UniPack Menu should appear.
4.
After completing step 3, did the SA UniPack Menu appear?
•
•
If yes, type 2 and then press Enter to restore the DNCS database.
Results:
−
Results:
−
The system displays a list of backups that are available.
−
The following message appears:
Select the backup directory you want to restore from
•
If no, contact Cisco Services for assistance.
5.
Type the number that corresponds to this UniPack and then press Enter.
Note: The UniPack’s backup directory is usually listed as the first one.
Result: The system restores and converts the Database.
Note: The UniPack’s backup directory is usually listed as the first one.
Result: The system restores and converts the Database.