Cisco Headend System Release 2.5 Installation Guide
1-4
Initial Installation of RNCS Software
78-4003191-01 Rev B
Log on to the Sun Fire V240 Server,
Continued
6.
Type break and then press Enter.
Result: The system interrupts the boot process of the Sun Fire V240
Result: The system interrupts the boot process of the Sun Fire V240
server.
7.
Type console -f and then press Enter.
Result: A message appears that instructs you to type #. to return to the
Result: A message appears that instructs you to type #. to return to the
ALOM port.
8.
Press Enter again.
Results:
•
Results:
•
Control transfers to the console of the Sun Fire V240 server (rather than
the ALOM port).
•
The ok prompt should appear.
9.
After completing step 8, did the ok prompt appear, as described?
•
•
If yes, go to step 10.
•
If no, repeat steps 6 through 8.
10. Type #. (the # key followed by a period).
Results:
•
•
Control returns to the ALOM port.
•
The sc> prompt appears.