Cisco Headend System Release 2.7
Chapter 2 DNCS Configuration for Distributed BFS
12
4017541 Rev B
Add an MPEG Source
This section provides instructions for adding an emulated MUX to the DNCS for a
distributed BFS. When you add an emulated MUX to the DNCS, you add it as an
MPEG source, name it BFS MUX, and either choose or type MUX as the device type.
distributed BFS. When you add an emulated MUX to the DNCS, you add it as an
MPEG source, name it BFS MUX, and either choose or type MUX as the device type.
Note: The MPEG source device types serve only as placeholders.
If you already have an emulated MUX and secondary BFS QAM configured, you can
skip this section and go to Add a New OSM Source, Source Definition, and Session
(on page 31).
skip this section and go to Add a New OSM Source, Source Definition, and Session
(on page 31).
When adding an MPEG source to the DNCS, you must set up the basic parameters
and establish the connectivity from the MPEG source to the BFS QAMs.
and establish the connectivity from the MPEG source to the BFS QAMs.
Setting Up Basic Parameters for the MPEG Source
1 On the DNCS Administrative Console, click the DNCS tab.
2 Click the Network Element Provisioning tab.
3 Click MPEG Source. The MPEG Source List window opens.
2 Click the Network Element Provisioning tab.
3 Click MPEG Source. The MPEG Source List window opens.