Cisco Headend System Release 2.7
LED Indicators Displayed During a Software Download
736107 Rev D
93
Blinks 8 Times, Then Pauses
The POWER LED indicator blinks eight times and then pauses for half a second. This
The POWER LED indicator blinks eight times and then pauses for half a second. This
is equivalent to the four dashes [- - - - ] LED code that appears on the front panel of
alphanumeric LED DHCTs.
This message indicates that the DHCT is not authorized for the brick mode
This message indicates that the DHCT is not authorized for the brick mode
avoidance package. In addition, the Service Disconnect Barker message appears on
the screen of any TV connected to the DHCT.
If a DHCT has not received the brick mode avoidance package, the DHCT is
If a DHCT has not received the brick mode avoidance package, the DHCT is
considered in brick mode. The brick mode avoidance package lets cable service
providers authorize services for the DHCT.
The possible causes for this condition are as follows:
The possible causes for this condition are as follows:
The cable service was disconnected.
The DHCT needs to receive a hit from the billing system that authorizes services
that a subscriber has requested.
The DHCT is not authorized for the brick mode avoidance package.
The DHCT timed out while receiving EMMs.