Cisco Headend System Release 2.7
Chapter 1 Staging Preparation
34
736107 Rev D
Notes:
Entering both the CableCARD ID and the CableCARD MAC Address is not
necessary. Entering either one is sufficient.
The CableCARD MAC Address field is not case-sensitive; however, all values
entered into this field are converted to uppercase letters.
6 Select Yes in the Host Bound column to allow the module and host set-top to
bind (SR 4.0 SP2 and later only).
7 Click Save CableCARD to save the configuration and bind the CableCARD
module to the host.
Important: After saving the CableCARD module on the DNCS, copy protected
Important: After saving the CableCARD module on the DNCS, copy protected
content should be displayed on the host within a few minutes. If it is not, contact
Cisco
®
Services for assistance.
8 If you are finished, click Exit All CableCARD screens to close the CableCARD
Data Summary window.