Cisco Headend System Release 2.7
Appendix B
Remove the Services Portal From Your System
160
78-745238-01 Rev D
6 Verify that the following requirements are met before you continue this
procedure:
The session numbers and program numbers are in sequential order.
The OSM session is the last entry in the table.
Notes:
During normal operation, the OSM session should always be the last session
in the PAT table. Most sites use 199 as the session number for the OSM
session.
The MAC Address for the OSM session should be 00:00:00:00:00:00.
Does your PAT table meet these requirements?
If yes, go to step 7.
If no, stop this procedure and call Cisco Services.
7 Record the session number of the OSM session. You will need this when you add
the OSM session back to the PAT table later in this appendix.
OSM Session Number: _______________________________
OSM Session Number: _______________________________
8 Select the OSM entry and click Delete Entry. The following message appears.
9 Click Yes. The following message appears.
10 Click OK.
11 Scroll to the Services Portal session. The Session Number is the same as the
11 Scroll to the Services Portal session. The Session Number is the same as the
source ID for the Services Portal inband source.