Cisco Headend System Release 2.5
Set Up the BFS
78-745238-01 Rev D
19
7 Does your PAT table meet the requirements specified in the previous step?
If yes, go to the next step.
If no, stop this procedure and call Cisco Services.
8 Click New Entry on the BIG PAT window. The BIG PAT Setup window opens.
9 For Session MAC Address, type twelve zeroes (00:00:00:00:00:00), and press
Tab.
Note: Do not type the colons.
Note: Do not type the colons.
10 For Session Number, type the source ID for the inband carousel, and click Save.
You recorded this number in Determining the Session Number (on page 15).
Note: The values for Program Number and PMT PID appear automatically.
Note: The values for Program Number and PMT PID appear automatically.
11 Close the BIG PAT window.
12 In the Inband Data Pat window, click Close.
13 In the Set Up BFS Host window, click Save then Cancel.
14 Close the Site DNCS BFS Administration window.
15 Go to
12 In the Inband Data Pat window, click Close.
13 In the Set Up BFS Host window, click Save then Cancel.
14 Close the Site DNCS BFS Administration window.
15 Go to
Adding the Services Portal to the Source List (on page 20).