Cisco Headend System Release 2.7 Design Guide
Chapter 2 Monitoring SDV Alarms
40
4002915 Rev B
SDV Session Alarms
SDV Server Trap 100 (64 Hex)
Alarm Summary:
SDV Session Bind Failure
Description:
This alarm occurs when the server fails to bind a program to a session on the edge
device.
device.
Severity:
Major
Service Impact:
When this alarm occurs, the SDV client is denied service because a new program
could not be established on the edge device.
could not be established on the edge device.
Check and Correct:
Possible Cause
Check and Correct Instructions
The edge device may be unreachable.
1
Analyze the error code associated with
the alarm and determine if the SDV
Server Alarm ID 6 (6 Hex) also
occurred.
the alarm and determine if the SDV
Server Alarm ID 6 (6 Hex) also
occurred.
2
If SDV Server Alarm ID 6 has occurred,
then refer to the Check and Correct
procedures for SDV Server Trap 6
(6 Hex) (on page 31).
then refer to the Check and Correct
procedures for SDV Server Trap 6
(6 Hex) (on page 31).
3
If the SDV Server Alarm ID 6 has not
occurred, then proceed to the next
possible cause.
occurred, then proceed to the next
possible cause.
4
Check and verify the amount of
bandwidth allotted for the service
groups.
bandwidth allotted for the service
groups.
Edge device software error.
Investigate the edge device alarms and try
to assess the cause of the error.
to assess the cause of the error.