Cisco Model D-PCG1000 PowerKEY CAS Gateway User Guide
Chapter 6 Setting Up the Interactive Program Guide
92
4023142 Rev B
5 Click the IPG tab. The IPG tab moves to the forefront and displays the settings
that are available for selection.
6 In the Memory Usage area of the tab, select each setting that you want to be able
to configure at the hub level. The selection box for each setting that you select
turns yellow to indicate that the setting is enabled and available for use in
creating hub-specific configurations.
7 Click Save. These selections are made available to all hubs and the Select Hub-
Specific Items window closes. You can now configure and send IPG Memory
Usage settings to DHCTs in a hub. Go to To Send IPG Memory Usage Settings to
All DHCTs in a Hub (on page 92).
To Send IPG Memory Usage Settings to All DHCTs in a Hub
After you have enabled hub-specific IPG Memory Usage settings, follow these
After you have enabled hub-specific IPG Memory Usage settings, follow these
instructions to configure and send them to all DHCTs in a hub.
1 On the DNCS Administrative Console, select the Server Applications tab.
2 Click DHCT Config. The DHCT Configure Prompt window opens.
1 On the DNCS Administrative Console, select the Server Applications tab.
2 Click DHCT Config. The DHCT Configure Prompt window opens.