Cisco Headend System Release 2.5 Release Notes

Page of 160
 
Appendix C 
Direct ASI Installation and Configuration Procedures 
96 
4000916 Rev C 
Install the ASI Card 
Installing the ASI Card 
The Common Download feature requires that a special card be installed in the 
DNCS. Sites that support both the Direct ASI feature, as well as the Common 
Download feature, may find it convenient to install the Common Download card at 
the same time that the Direct ASI card is installed. For this reason, information 
pertaining to the Common Download card is included in step 4. 
After deleting (if necessary) the ASI package from the DNCS, follow the instructions 
in this section to install the ASI card. 
1  Follow these instructions, if necessary, to log in to the xterm window as root 
user. 
Note:  If you had to remove the ASI package in the previous procedure, you 
should already be root user. 
a  Type su  - and then press Enter. The password prompt appears. 
b  Type the root password and then press Enter
2  Type shutdown  -y  -g0  -i0 and then press Enter. The DNCS shuts down and the 
ok prompt appears. 
3  Turn off power to the DNCS. 
4  Remove the cover to the DNCS and install the ASI card into one of the following 
slots: 
 
For a Enterprise 250 DNCS, Slot 2 
 
For a Enterprise 450 DNCS, Slot 5 
 
For a Sun Fire V880 DNCS, Slot 7  
5  Is your site you upgrading to support the common download feature? 
 
If yes, then install the common download card in the following slot: 
– 
For a Sun Fire V880 DNCS, Slot 2 
– 
For a Enterprise 450 DNCS, Slot 4  
 
If no, go to step 6. 
6  Put the cover back on the DNCS. 
7  Turn on power to the DNCS.