Cisco Headend System Release 2.5 Release Notes

Appendix D

Direct ASI Rollback Procedures

130

4000916 Rev C

Record TSID Values for BFS MPEG Source and
BFS QAM

Introduction

The first step in rolling back the Direct ASI installation requires that you record the
current transport stream ID (TSID) values for the BFS MPEG source and the BFS
QAM.

Note: If a GQAM or an MQAM is used as the BFS QAM, record the TSID for the BFS
port of the GQAM or MQAM.

Recording the TSID Value for the BFS MPEG Source

Follow these instructions to record the TSID for the BFS MPEG Source.
1 From the DNCS Administrative Console, click the Element Provisioning tab and

then select MPEG Source.
Result: The MPEG Source List window opens.

2 Double-click the entry for ASI_BFS.

Result: The Set Up MPEG Source window opens.

3 Select the Connectivity tab.

4 Record the value for TS ID here: ________________

5 Click Cancel to close the Set Up MPEG Source window.