Cisco Headend System Release 2.5 Release Notes
Chapter 3 System Release 2.5/3.5 SP1 Installation Procedures
40
4000916 Rev C
Install the DNCS Software
Installing the DNCS Software
Notes:
You should still be logged in as root user to the xterm window on the DNCS.
It may take as long as 2 hours to install the DNCS software.
1 Insert the CD labelled DNCS Application 4.0.0.27 into the CD drive of the
DNCS. The system automatically mounts the CD to /cdrom within 30 seconds.
2 Type df -n and then press Enter. A list of the mounted filesystems appears.
Note: The presence of /cdrom in the output confirms that the system correctly
mounted the CD.
mounted the CD.
3 Type cd /cdrom/cdrom0 and then press Enter. The /cdrom/cdrom0 directory
becomes the working directory.
4 Type swmtool -d and then press Enter to open the Add Software window.
5 From the Admintool: Add Software window, select Cancel. The Admintool:
5 From the Admintool: Add Software window, select Cancel. The Admintool:
Software window opens.
6 From the Admintool: Software window, select Properties and then choose
Package Administration from the pull-down menu.
7 Set the fields on the Admintool: Package Administration window to the
following values:
Existing Files
Overwrite
Existing Packages
Overwrite
Existing Partial Installations
Ask
Install setuid/setgid Files
Yes
Run setuid/setgid Scripts
Yes
Note: Leave the remaining fields at their default value.
8 Select OK to accept the values you selected.
9 From the Admintool: Software window, select Edit and then choose Add from
9 From the Admintool: Software window, select Edit and then choose Add from
the pull-down menu. The Admintool: Add Software window reappears.
10 Select the DNCS Application package option.
11 Select Add on the Admintool: Add Software window. You will see a copyright
11 Select Add on the Admintool: Add Software window. You will see a copyright
message and confirmation message.