Cisco Headend System Release 2.5 Release Notes
Chapter 3 System Release 2.5/3.5/4.0 SP3 Installation Procedures
58
4004148 Rev C
Reboot the DNCS and Application Server
After installing the software onto the DNCS, complete the following steps to reboot
the DNCS and Application Server.
1 Choose one of the following options:
the DNCS and Application Server.
1 Choose one of the following options:
If you are using a Cisco Application Server, open an xterm window (if
necessary) on the Application Server.
necessary) on the Application Server.
If you are using an Aptiv Application Server, skip to step 4.
2 Complete the following steps to log on to the xterm window as root user.
a Type su - and press Enter. The password prompt appears.
b Type the root password and press Enter.
b Type the root password and press Enter.
3 From the xterm window on the Application Server, type
/usr/sbin/shutdown -g0 -y -i0 and then press Enter. The Application Server
shuts down.
shuts down.
4 If necessary, open an xterm window on the DNCS.
5 Complete the following steps to log on to the xterm window as root user.
5 Complete the following steps to log on to the xterm window as root user.
a Type su - and press Enter. The password prompt appears.
b Type the root password and press Enter.
b Type the root password and press Enter.
6 From the xterm window on the DNCS, type /usr/sbin/shutdown -g0 -y -i6 and
then press Enter. The DNCS reboots and the CDE Login window appears.
7 Log on to the DNCS as dncs user.
8 Choose one of the following options:
8 Choose one of the following options:
If the site you are upgrading uses the Cisco Application Server, go to step 9.
If the site you are upgrading uses the Aptiv application server, go to step 11.
9 At the ok prompt on the Cisco Application Server, type boot and then press
Enter. The Application Server reboots.
10 Log on to the Application Server as dncs user.
11 Choose one of the following options:
11 Choose one of the following options:
If you are using a Cisco Application Server, go to Restart the System
Components (on page 61).
Components (on page 61).
If you are using an Aptiv Application Server, go to Disable the SAM Process
on Aptiv Systems (on page 60). Then return here and resume with step 12.
on Aptiv Systems (on page 60). Then return here and resume with step 12.