Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide
Pedestal or Wall Mounting the Node
OL-29643-02
79
Pedestal or Wall Mounting the Node
Description
Two mounting holes on the housing allow pedestal or wall mounting.
Procedure
Follow this procedure for pedestal or wall mounting.
WARNING:
Be aware of the size and weight of the node while mounting. A fully
loaded GS7000 Node weighs over 50 lbs (22.7 kg).
Ensure that proper handling/lifting techniques are employed when
working in confined spaces with heavy equipment.
Failure to observe these admonishments can result in serious injury or
death.
loaded GS7000 Node weighs over 50 lbs (22.7 kg).
Ensure that proper handling/lifting techniques are employed when
working in confined spaces with heavy equipment.
Failure to observe these admonishments can result in serious injury or
death.
1 Remove the cover of the pedestal.
2 Remove the self-tapping bolts from the strand clamps, if previously installed,
2 Remove the self-tapping bolts from the strand clamps, if previously installed,
and set the bolts and strand clamps aside.
3 Position the GS7000 Node horizontally in the enclosure and allow for free flow of
air around it. Inadequate airflow could cause the node to exceed thermal
parameters. Line up the bolt holes on the bottom of the housing with the
mounting holes on the pedestal bracket provided by the pedestal manufacturer.
parameters. Line up the bolt holes on the bottom of the housing with the
mounting holes on the pedestal bracket provided by the pedestal manufacturer.