Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide

 

OL-29643-02 

113 

 

This section describes how to configure the forward signal routing of the GS7000 
Node. 

 

The receiver modules and the forward configuration module determine the forward 
signal routing. Each module must be in its proper slot to achieve the different node 
configurations. 
The following table shows the required modules and their slot locations for various 
node configurations. 

 

one receiver, four 
outputs 

1x2 Forward (2-way RF amp only) 
 
1x4 Forward (4-way RF amp only) 

1 

one receiver, four 
outputs (with external 
RF source) 

1x2 Forward with Forward RF 
Injection, plus FLI module (2-way 
RF amp only) 
 
1x4 Forward with Forward RF 
Injection, plus FLI module (4-way 
RF amp only) 

1 

two receivers, four 
outputs, redundant 

1x2 Redundant Forward, plus 
SM/LCM (2-way RF amp only) 
 
1x4 Redundant Forward, plus 
SM/LCM (4-way RF amp only) 

1, 2 

two receivers, four 
outputs, redundant (with 
external RF source) 

1x2 Redundant Forward with 
Forward RF Injection, plus 
SM/LCM and FLI module (2-way 
RF amp only) 
 
1x4 Redundant Forward with 
Forward RF Injection, plus 
SM/LCM and FLI module (4-way 
RF amp only) 

1, 2