Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Guía De Instalación
Reconfiguring Forward Signal Routing
OL-29643-02
113
Reconfiguring Forward Signal Routing
Introduction
This section describes how to configure the forward signal routing of the GS7000
Node.
Node.
Forward Routing Configurations
The receiver modules and the forward configuration module determine the forward
signal routing. Each module must be in its proper slot to achieve the different node
configurations.
The following table shows the required modules and their slot locations for various
node configurations.
signal routing. Each module must be in its proper slot to achieve the different node
configurations.
The following table shows the required modules and their slot locations for various
node configurations.
If the configuration is…
Then use configuration module…
Install Receivers in
Positions...
one receiver, four
outputs
outputs
1x2 Forward (2-way RF amp only)
1x4 Forward (4-way RF amp only)
1x4 Forward (4-way RF amp only)
1
one receiver, four
outputs (with external
RF source)
outputs (with external
RF source)
1x2 Forward with Forward RF
Injection, plus FLI module (2-way
RF amp only)
1x4 Forward with Forward RF
Injection, plus FLI module (4-way
RF amp only)
Injection, plus FLI module (2-way
RF amp only)
1x4 Forward with Forward RF
Injection, plus FLI module (4-way
RF amp only)
1
two receivers, four
outputs, redundant
outputs, redundant
1x2 Redundant Forward, plus
SM/LCM (2-way RF amp only)
1x4 Redundant Forward, plus
SM/LCM (4-way RF amp only)
SM/LCM (2-way RF amp only)
1x4 Redundant Forward, plus
SM/LCM (4-way RF amp only)
1, 2
two receivers, four
outputs, redundant (with
external RF source)
outputs, redundant (with
external RF source)
1x2 Redundant Forward with
Forward RF Injection, plus
SM/LCM and FLI module (2-way
RF amp only)
1x4 Redundant Forward with
Forward RF Injection, plus
SM/LCM and FLI module (4-way
RF amp only)
Forward RF Injection, plus
SM/LCM and FLI module (2-way
RF amp only)
1x4 Redundant Forward with
Forward RF Injection, plus
SM/LCM and FLI module (4-way
RF amp only)
1, 2