Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Chapter 3 Operating the DAVIC QPSK Demodulator
30
78-545617-01 Rev F
Changing the Major Alarm
Follow these steps to arm or disarm the Major Alarm setting on the QPSK
demodulator.
1 Press OPTIONS on the front panel of the QPSK demodulator four times. The
1 Press OPTIONS on the front panel of the QPSK demodulator four times. The
Major Alarm screen appears.
2 Press the Up or Down Arrow keys to choose one of the following Major Alarm
arming options:
AUTO
ON
OFF
Changing the Minor Alarm
Follow these steps to arm or disarm the Minor Alarm setting on the QPSK
demodulator.
1 Press OPTIONS on the front panel of the QPSK demodulator five times. The
1 Press OPTIONS on the front panel of the QPSK demodulator five times. The
Minor Alarm screen appears.
2 Press the Up or Down Arrow keys to choose one of the following Minor Alarm
arming options:
AUTO
ON
OFF
Changing the Node ID
Important! The DNCS overrides any changes made to the node ID using the front
panel keys if the QPSK demodulator is reset.
Follow these steps to change the Node Identification (ID) on the QPSK demodulator.
1 Press OPTIONS on the front panel of the QPSK demodulator six times. The
Follow these steps to change the Node Identification (ID) on the QPSK demodulator.
1 Press OPTIONS on the front panel of the QPSK demodulator six times. The
Node ID screen appears.
2 Press the Up or Down Arrow keys to choose an ASCII character for the space the
cursor is on.