Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Using the OPTIONS Key Menus
78-545617-01 Rev F
29
Changing the LCD Contrast Screen
Follow these steps to change the LCD contrast of the front panel display screen on
the QPSK demodulator.
1 Press OPTIONS on the front panel of the QPSK demodulator. The LCD contrast
1 Press OPTIONS on the front panel of the QPSK demodulator. The LCD contrast
screen appears.
2 Press the Up or Down Arrow keys to increase or decrease the contrast from 0%
to 100% in 5% increments.
3 Press ENTER to save changes to nonvolatile memory and return to the Default
Status screen.
Changing the RF Input Level
Important! The DNCS overrides any changes made to the RF input level using the
front panel keys if the QPSK demodulator is reset.
Follow these steps to change the RF Input Level range on the QPSK demodulator.
1 Press OPTIONS on the front panel of the QPSK demodulator two times. The RF
Follow these steps to change the RF Input Level range on the QPSK demodulator.
1 Press OPTIONS on the front panel of the QPSK demodulator two times. The RF
Input Level screen appears.
2 Press the Up or Down Arrow keys to increase or decrease the RF Input Level.
3 Press ENTER to save changes to nonvolatile memory and return to the Default
3 Press ENTER to save changes to nonvolatile memory and return to the Default
Status screen.
Changing the Operating Mode
Follow these steps to change the Operating Mode setting on the QPSK demodulator.
1 Press OPTIONS on the front panel of the QPSK demodulator three times. The
1 Press OPTIONS on the front panel of the QPSK demodulator three times. The
Operating Mode screen appears.
2 Press the Up or Down Arrow keys to choose one of the following Operating
Modes:
Normal
INGRESS