Cisco Model GS7000 4-Port Node 1 GHz with 42 54 Split Installation Guide
Chapter 5 Using the Web Interface
46
4037424 Rev A
Configuration Pages
The web interface includes two configuration pages:
Configuration Data page
GS7000 Configuration Data page
To access either configuration page, click the Config link at the top of the page.
Configuration Data Page
If the Configuration Data page is not the active page, click the Configuration button
in the left pane. The Configuration Data page appears, as shown in the following
example.
in the left pane. The Configuration Data page appears, as shown in the following
example.
To download a sysName and/or sysLocation to the transponder:
1
1
Enter a sysName and/or a sysLocation in the appropriate fields, and then click
the Apply button. A login dialog appears if the login process had not been
performed previously during the current session.
the Apply button. A login dialog appears if the login process had not been
performed previously during the current session.
2 In the login dialog, enter the correct user name and password, and then click
OK.
The Device Type displays the type of device the transponder is configured. FN is
displayed for Fiber Node.
displayed for Fiber Node.