Cisco Cisco GS7000 4-Port 1GHZ Node Installation Guide
Model GS7000 GainMaker Node
Local Control Module to Status
Monitor Upgrade Instructions
Local Control Module to Status
Monitor Upgrade Instructions
Introduction
The Model GS7000 GainMaker
®
Scaleable 4-Port Node can be optionally equipped
with a either a Status Monitor (SM) or a Local Control Module (LCM). For
complete instructions on installing and operating the SM/LCM refer to Model
GS7000 Node Status Monitor/Local Control Module Installation and Operation Guide,
part number 4015678.
complete instructions on installing and operating the SM/LCM refer to Model
GS7000 Node Status Monitor/Local Control Module Installation and Operation Guide,
part number 4015678.
A Local Control Module can be field upgraded to a Status Monitor through the
addition of a transponder core module. The transponder core module plugs
directly onto the Local Control Module’s main PWB and replaces the craft port
module. The mechanical housing for the Status Monitor and the Local Control
Module are the same.
addition of a transponder core module. The transponder core module plugs
directly onto the Local Control Module’s main PWB and replaces the craft port
module. The mechanical housing for the Status Monitor and the Local Control
Module are the same.
This document explains the LCM to SM field upgrade procedure.
The Status Monitor Upgrade Kit, part number 4011933, contains the following
items:
items:
Transponder core module (1)
Plastic stand-offs (2)
Upgrade instructions (1)