Cisco Model D-PCG1000 PowerKEY CAS Gateway Installation Guide
Set Up a CF Session on a Netcrypt Bulk Encryptor
4001444 Rev C
75
Set Up a CF Session on a Netcrypt Bulk Encryptor
This section provides instructions for setting up a CF session using a Netcrypt Bulk
Encryptor.
Setting Up a CF Session on a Netcrypt Bulk Encryptor
Follow these instructions to set up a CF session on a Netcrypt Bulk Encryptor.
1 On the DNCS Administrative Console, click the DNCS tab.
2 Click the System Provisioning tab.
3 Click Source. The Source List window opens.
4 Click Add. The New Source window opens.
1 On the DNCS Administrative Console, click the DNCS tab.
2 Click the System Provisioning tab.
3 Click Source. The Source List window opens.
4 Click Add. The New Source window opens.
5 Follow these instructions to enter data in the Set Up Source window:
Click in the Source Name field and type the name you will use to identify
this source. You can use up to 20 alphanumeric characters.
Note: We recommend that you use a naming scheme that indicates the
Note: We recommend that you use a naming scheme that indicates the
source type (digital), the channel number the service will use, and the service
name. For example, a source name of D02 WeatherScan indicates that this is
a digital source (D) providing content on channel 2 (02) for the WeatherScan
service.
Click in the Source ID field and type the number you will use to identify this
source. This can be any number (integer value) from 1 to 65535.