Cisco Headend System Release 2.7 Installation Guide
Chapter 6 Creating Sources and Setting Up Sessions
100
4017650 Rev C
15 Click in the Bandwidth field, type the bandwidth for the program, and then click
Next. The Save Source Definition window opens.
16 Click Save to save the source. The system saves the source and starts the session.
Important: SI-Server access criteria must be configured for this source using the
same value as the session ID.
Examples:
same value as the session ID.
Examples:
If the session ID is 00:00:00:00:00:00 10601, the access criteria in the SI-Server
must be 00000000000000002969.
must be 00000000000000002969.
If the session ID is 00:00:00:00:00:01 10601, the access criteria in the SI-Server
must be 00000000000100002969.
must be 00000000000100002969.
Notes:
When using a D96xx multiplexer or a PCG, session definitions are required
only for encrypted channels.
only for encrypted channels.
When you are setting up an encrypted session on the PCG, you must also
enable scrambling on the MUX using the SI-Server.
enable scrambling on the MUX using the SI-Server.
17 Access the Session Filter screen and verify that the sessions were set up correctly.