Cisco Headend System Release 2.5 Installation Guide
Model a Satellite Transport
4017650 Rev C
163
7 In the MAC Address field, enter the MAC address of the SCS device.
8 In the ID field, enter the ID of the device.
9 Click the check box for the Online field to make the SCS active.
10 Select the PCG in the Primary PCG field and enter the headend in the Headend
8 In the ID field, enter the ID of the device.
9 Click the check box for the Online field to make the SCS active.
10 Select the PCG in the Primary PCG field and enter the headend in the Headend
field.
11 In the Max Sessions field, enter the maximum number of sessions this device is
allowed to build.
12 Click Save.
13 After the SCS saved successfully, select the SCS and click Ports to view the ports
13 After the SCS saved successfully, select the SCS and click Ports to view the ports
for the selected SCS option.
14 Select a port from the SCS Devices screen and click Ports for Selected SCS.
15 Click Add Input Port and complete the screen.
16 Click Add Output Port and complete the screen.
17 Click Exit to return to the administrative console.
18 Create an MPEG source for this SCS port. See Set Up MPEG Sources (on page 34)
15 Click Add Input Port and complete the screen.
16 Click Add Output Port and complete the screen.
17 Click Exit to return to the administrative console.
18 Create an MPEG source for this SCS port. See Set Up MPEG Sources (on page 34)
for details.
19 Make sure the MPEG source for the SCS appears in the list of sources.
20 From the Network Element Provisioning tab, click Satellite/Terrestrial
20 From the Network Element Provisioning tab, click Satellite/Terrestrial
Transport. The Satellite Transport Parameters window opens.
21 Click Add New to add a row to the screen.
22 Complete the fields as follows:
22 Complete the fields as follows:
TS ID. Enter the ID for the transport stream.
Download Frequency. Enter the frequency to use for the download.
Symbol Rate. Enter enter the symbol rate
Polarization. From the drop-down list, select the polarization method.
Modulation. From the drop-down list, select the modulation type.
Hub ID. From the drop-down list, select the Hub ID.
Cable TS ID. Enter the ID for the cable transport stream.
Important: The TS ID for the satellite transport must be unique for the DNCS
and not conflict with the TS IDs of either QAM or SCS devices.
Important: The TS ID for the satellite transport must be unique for the DNCS
and not conflict with the TS IDs of either QAM or SCS devices.
Home TS. Check this box if it is the home transport stream.
23 Click Save.