Cisco Headend System Release 2.7 Installation Guide
Common Download
78-4036705-01 Rev D
121
2 Click Add. The Add Vendor and Hardware ID screen appears.
3 Type the vendor ID and hardware ID for the hardware you are adding, and click
Save.
Note: The vendor ID for Cisco is 0x223a, and the hardware ID for DTA30s is
0x643.
Note: The vendor ID for Cisco is 0x223a, and the hardware ID for DTA30s is
0x643.
4 Repeat steps 2 and 3 if you need to add another vendor and hardware ID.
Manage Image Associations
The following sections explain how to add, edit and delete image associations on the
DTACS Server.
DTACS Server.
Note: Before you begin, the vendor and hardware ID must be added to the system.
See Add a New Vendor and Hardware ID (on page 120) if you need to add a vendor
or hardware ID.
See Add a New Vendor and Hardware ID (on page 120) if you need to add a vendor
or hardware ID.
Add an Image Association
Follow these instructions to add an image association to the DTACS.
1 On the DTACS main window, click the DTACS tab.
2 Click the Provisioning tab.
1 On the DTACS main window, click the DTACS tab.
2 Click the Provisioning tab.