Cisco Headend System Release 2.7 Installation Guide
Chapter 2 SR 5.0 Pre-Upgrade Procedures
26
4035749 Rev B
3 Highlight a third-party application cabinet and then click File and select Open.
The Set Up Server window opens for the selected cabinet.
4 On a sheet of paper, record the Server Name, the Mode (whether 1-way or 2-
way), and the Selected Source(s) used to regulate the cabinet.
Note: In the example used in step 3, the Server Name is VodlinkIB, the Mode is
1-way, and the Selected Source is VodlinkIB.
Important: Do not lose this sheet of paper. You will need it when completing
post-upgrade instructions.
Note: In the example used in step 3, the Server Name is VodlinkIB, the Mode is
1-way, and the Selected Source is VodlinkIB.
Important: Do not lose this sheet of paper. You will need it when completing
post-upgrade instructions.
5 Click Cancel to close the Set Up Server window.
6
6
Repeat steps 3 through 5 for every third-party BFS application cabinet on the
Broadcast File Server List window.
Broadcast File Server List window.
7 Close the Broadcast File Server List window when you are finished.