Cisco Headend System Release 2.7 Installation Guide
Chapter 4 Maintenance Window Activities
50
4035749 Rev B
Continue with the SR 5.0 Upgrade of the DNCS
1
From the root xterm window, type the following command on the DNCS and
press Enter. The Do you want to continue with the upgrade? message appears.
press Enter. The Do you want to continue with the upgrade? message appears.
/var/tmp/lu_continue
2 Type y and then press Enter. The Are you certain you want to proceed? message
appears.
3 Type y and press Enter. The system detaches the database mirrors.
Important: Do not type init 6 to reboot the DNCS until the lu_continue script has
been run on all of the servers on the system.
been run on all of the servers on the system.
4 Type lustatus to verify the new boot environment is set to Active On Reboot.
The system displays a message similar to the following:
5 Choose one of the following options:
If you are upgrading an RNCS, go to Continue with the RNCS Upgrade (on
page 51).
page 51).
If you are upgrading the DNCS with an integrated Application Server, go to
Shut Down and Reboot the Servers (on page 52).
Shut Down and Reboot the Servers (on page 52).