Cisco Headend Digital Broadband Delivery System Installation Guide

Page of 168
 
 
Overlay Systems 
78-4004034-01 Rev C 
89 
 
Overlay Systems 
Introduction 
This section describes an overlay system. This chapter includes procedures for both 
the standard ASI installation and an ASI overlay installation. Therefore, in some of 
the installation prompts, you will be asked to respond based on whether or not you 
have an overlay system. 
 
What Is an Overlay System? 
An overlay system is one in which more than one vendor is providing applications 
to an ISA system. For example, Showrunner overlay refers to sites that use the 
Passport resident application, as well as SARA. 
Each application normally registers all of its applications (or applets) with its 
associated products on the Business Management System (BMS). Each product on 
the BMS supports the registration of only one application. 
In an overlay system, two vendors provide applications that register with the same 
product. Therefore, you must make sure that only one of the vendor’s applications 
registers with each product on the BMS. In addition, you also need to make sure that 
each unique application registers with its product on the BMS. 
You meet these requirements by responding appropriately to the prompts that apply 
to overlay and by configuring applets for overlay support. For more information on 
configuring applets, refer to the xOD 1.6 Configuration Guide (part number 4004032).