Cisco Headend System Release 2.7 Installation Guide
Chapter 3 SR i4.2.2 Common Upgrade Procedures
64
4036631 Rev B
The Application Server key files restore.
Note: If a "glob failed" message appears, it may be because your system does
not have NIS configuration files. You can ignore this message.
Note: If a "glob failed" message appears, it may be because your system does
not have NIS configuration files. You can ignore this message.
The CDE window appears.
Notes:
The installation process may take more than 2 hours. Do not interrupt the
installation process.
installation process.
In some cases, a system identification window opens after booting.
In some cases, a Solaris Registration Wizard window opens.
19 Did a system identification window open, as described in step 18?
If yes, the window will ask you a series of questions. The following steps
detail what your answers to those questions should be.
a Press F2 to continue.
detail what your answers to those questions should be.
a Press F2 to continue.
b Press F2 to continue.
c Select None for the Name Service.
d Press F2 to continue.
e Confirm and press F2 to continue.
f Select Yes for Part of a Subnet.
g Press F2 to continue.
h Type the Netmask of 255.255.255.0.
i Press F2 to continue.
j Confirm and press F2 to continue.
k Go to step 20.
If no, go to step 20.
20 Did a Solaris Registration Wizard open, as described in step 18?
If yes, follow these instructions.
a Select Run the Solaris Software without Registering.
a Select Run the Solaris Software without Registering.
b Click Next in the lower part of the window.
c Select Never Register.
d Go to step 21.
If no, go to step 21.
21 Log in to the CDE of the Application Server as root user.
22 Did you upgrade an Ultra 5 Application Server?
22 Did you upgrade an Ultra 5 Application Server?
If yes, go to step 23.
If no, go to Check Installed Version Numbers on the Application Server (on
page 66).
page 66).
23 Type shutdown -y -g0 -i0 and press Enter.