Cisco Headend System Release 2.7 Installation Guide
Upgrade the Application Server Software
4036631 Rev B
65
24 At the OK prompt, type printenv auto-boot? and press Enter. The auto-boot
value displays.
25 Is auto-boot set to true?
If yes, type boot, press Enter, and login as dncs user.
If no, go to step 26.
26 Type setenv auto-boot? true and press Enter.
27 Type printenv auto-boot? to verify that auto-boot is now set to true.
28 Type boot -r and press Enter.
29 Login as dncs user.
27 Type printenv auto-boot? to verify that auto-boot is now set to true.
28 Type boot -r and press Enter.
29 Login as dncs user.
Completing the Sun Fire V240 or V245 Application Server Upgrade
1 At the OK prompt, type boot -r and press Enter.
Results:
The Application Server reboots several times. On the first reboot, the system
builds the disk mirrors and reboots.
builds the disk mirrors and reboots.
The system then restores the key files and reboots.
The system begins to build the new file system.
After the final reboot, the new boot environment contains SR i4.2.2.
2 Log on to the CDE window of the V240 or V245 Application Server as dncs user.