Cisco Headend System Release 2.7 Installation Guide
Confirm That Direct ASI is Enabled (Optional)
4036631 Rev B
69
Confirm That Direct ASI is Enabled (Optional)
If you have enabled Direct ASI as part of this upgrade, complete this procedure to
ensure that an entry has been made for Direct ASI in the database.
1 From an xterm window on the DNCS, type dbaccess dncsdb - and then press
ensure that an entry has been made for Direct ASI in the database.
1 From an xterm window on the DNCS, type dbaccess dncsdb - and then press
Enter.
2 Type select * from mc_config where mc_param_name = "DIRECT_ASI"; and
then press Enter. You should see output similar to the following:
mc_name
mc_name
Cisco
mc_param_name DIRECT_ASI
mc_param_data 0
Note: Call Cisco Services if the results from step 2 do not show DIRECT_ASI.
mc_param_data 0
Note: Call Cisco Services if the results from step 2 do not show DIRECT_ASI.