Cisco Headend System Release 2.7 Installation Guide
Examine and Re-Order the pddataqampat Table
4036631 Rev B
77
Examine and Re-Order the pddataqampat Table
In some system releases, session ID 199 had to be the last entry in the Session
Number column of the pddataqampat table. With the current release, this is no
longer a requirement, and in fact, session ID 199 must now appear in numerical
order along with all the other BFS sessions. Session ID 199 should now appear
immediately after session ID 22.
First you need to ensure that BFS session 199 is enabled. If the system you are
upgrading has the Distributed DNCS licensed, consult with the system operator to
determine which distributed site(s) should have session 199 (bootloader) enabled.
Number column of the pddataqampat table. With the current release, this is no
longer a requirement, and in fact, session ID 199 must now appear in numerical
order along with all the other BFS sessions. Session ID 199 should now appear
immediately after session ID 22.
First you need to ensure that BFS session 199 is enabled. If the system you are
upgrading has the Distributed DNCS licensed, consult with the system operator to
determine which distributed site(s) should have session 199 (bootloader) enabled.
Verify that BFS Session 199 is Enabled
Make sure that BFS session 199 is enabled. If the system you are upgrading has the
Distributed DNCS licensed, consult with the system operator to determine which
distributed site(s) should have session 199 (bootloader) enabled.
1 From the DNCS Administrative Console, select the Application Interface
Distributed DNCS licensed, consult with the system operator to determine which
distributed site(s) should have session 199 (bootloader) enabled.
1 From the DNCS Administrative Console, select the Application Interface
Modules tab.
2 Select BFS Admin. The Site DNCS BFS Administration window opens.
3 Does your system support the Distributed DNCS feature?
3 Does your system support the Distributed DNCS feature?
If yes, the result from step 2 shows multiple site names; go to step 4.
If no, the result from step 2 shows that dncsatm and maybe appservatm are
displayed; go to step 5.
displayed; go to step 5.
4 Double-click the DNCS entry, typically Site ID 1. The Site DNCS BFS
Administration window opens.
5 Click Sources. The Source List window opens.
6 Double-click Source ID 199. The Set Up BFS Source window opens.
7 Is the Run button (next to Datapump) selected?
6 Double-click Source ID 199. The Set Up BFS Source window opens.
7 Is the Run button (next to Datapump) selected?
If yes, click Cancel and go to step 10.
If no, select Run, click Save, and then go to step 8.
8 Select a QAM from the Available Local BFS QAMs list and then select a port
from the Output Ports list.
9 Click Save.
10 Repeat steps 4 through 9 for each applicable distributed site.
11 Close any open BFS-related windows.
10 Repeat steps 4 through 9 for each applicable distributed site.
11 Close any open BFS-related windows.