Cisco Headend System Release 2.7 Installation Guide
Create the Out-of-Band and Inband Carousels
4019969 Rev B
29
5 To configure the out-of-band BFS source, complete the following fields:
a Source Name—type InView-oob
Important: Capitalize the letters I and V in the word InView.
b Source ID—type a source ID for the out-of-band source
Note: For recommendations on selecting a source ID, see Recommendations for
Data Carousel Rate Management (part number 716377).
c Source Type—select BFS
d Transport Type—Select Out-of-band
e Device Name—this field is unavailable when creating an out-of-band source
f Data Rate and Block Size—refer to Recommendations for Data Carousel Rate
d Transport Type—Select Out-of-band
e Device Name—this field is unavailable when creating an out-of-band source
f Data Rate and Block Size—refer to Recommendations for Data Carousel Rate
Management (part number 716377) and type the recommended values based
on the version of your system release and the number of third-party
applications your system supports
g Indication Interval—maintain the default value
h Source—click enable
i Available Hosts—select dncsatm and click Add to move the dncsatm host to
h Source—click enable
i Available Hosts—select dncsatm and click Add to move the dncsatm host to
the Selected Hosts column
6 Click Save. The Set Up BFS Source window closes and the BFS Administration
window is updated with the new InView out-of-band source.
7 Keep the BFS Administration window open and go to
Creating an Inband
Carousel (on page 30).