Cisco Headend System Release 2.7 Installation Guide
Chapter 3 Provision the DNCS for InView 3.6
30
4019969 Rev B
Creating an Inband Carousel
1 From the BFS Administration window, click File and select New. The Set Up BFS
Source window opens.
2 To configure the inband BFS source, complete the following fields:
a Source Name—type InView
Important: Capitalize the letters I and V in the word InView.
b Source ID—enter the source ID associated with InView
c Source Type—select BFS
d Transport Type—Select ASI In-band
e Device Name—maintain the default value
f Data Rate and Block Size—refer to Recommendations for Installing Applications
c Source Type—select BFS
d Transport Type—Select ASI In-band
e Device Name—maintain the default value
f Data Rate and Block Size—refer to Recommendations for Installing Applications
on the DNCS and Application Server (part number 749638) and type the
recommended values based on the version of your system release and the
number of third-party applications your system supports
g Indication Interval—maintain the default value
h Source—click enable
i Available Hosts—select dncsatm and click Add to move the dncsatm host to
h Source—click enable
i Available Hosts—select dncsatm and click Add to move the dncsatm host to
the Selected Hosts column
3 Click Save. The Set Up BFS Source window closes and the BFS Administration
window is updated with the new InView inband source.
4 From the BFS Administration window, click File and select Close.