Cisco Headend System Release 2.7 Installation Guide
Network Configuration
78-4021167-01 Rev D
27
11 The /etc/hosts file should look similar to the following example:
#
# Internet host table
#
::1 localhost
127.0.0.1 localhost
172.35.0.1 lionn2 lionn2. loghost
10.253.0.1 dncsatm dncs_host isds_host
192.168.64.1 lionn2OM
Editing the /etc/nodename File
1 If necessary, log on to the RNCS as root user.
2 Type cat /etc/nodename and press Enter. The /etc/nodename file opens for
2 Type cat /etc/nodename and press Enter. The /etc/nodename file opens for
inspection.
3 Does the file already contain the hostname of the RNCS?
If yes, go to Editing the /etc/hostname.bge0 File (on page 27).
If no, open the /etc/nodename file in a text editor.
4 Change or add the RNCS hostname to the file.
Note: The hostname should be the same hostname that you entered in step 10 of
Install the RNCS Software (on page 11).
Example: If your RNCS hostname is lionn2, you should add the following to this
Example: If your RNCS hostname is lionn2, you should add the following to this
file:
lionn2
5 Save and close the file.
Editing the /etc/hostname.bge0 File
1 If necessary, log on to the RNCS as root user.
2 Type cat /etc/hostname.bge0 and press Enter. The /etc/hostname.bge0 file
2 Type cat /etc/hostname.bge0 and press Enter. The /etc/hostname.bge0 file
opens for inspection.
Note: For sites that use the Netra T5220 server, the file is /etc/hostname.e1000g0.
Note: For sites that use the Netra T5220 server, the file is /etc/hostname.e1000g0.
3 Does the file already contain the hostname of the RNCS?
If yes, go to Editing the /etc/defaultrouter File (on page 28).
If no, open the /etc/hostname.bge0 file in a text editor.
Note: For sites that use the Netra T5220 server, the file is
Note: For sites that use the Netra T5220 server, the file is
/etc/hostname.e1000g0.