Cisco Headend System Release 2.7 Installation Guide
Add and Configure the RNCS
78-4021167-01 Rev D
33
Add and Configure the RNCS
Adding the RNCS Site
Complete the following steps to add the RNCS to the ISDS configuration.
1 On the ISDS, open, if necessary, the ISDS Administrative Console.
2 Select the System Provisioning tab.
3 Click RNCS Sites. The Site Summary window opens.
4 Click Add. The Site Summary window updates to reveal a new, empty row.
5 Enter the following information:
1 On the ISDS, open, if necessary, the ISDS Administrative Console.
2 Select the System Provisioning tab.
3 Click RNCS Sites. The Site Summary window opens.
4 Click Add. The Site Summary window updates to reveal a new, empty row.
5 Enter the following information:
Site Name—A unique name for the site
Note: Our engineers recommend that the site name should be the same as
Note: Our engineers recommend that the site name should be the same as
the hostname that you entered in step 10 of Install the RNCS Software (on
page 11).
Site ID—A unique number identifying the site
IP Address—The IP address of the site
Online—Select this option (so that a checkmark appears in the box) to
activate the site.
6 Click Save. A Confirmation message appears.
7 Click OK.
8 Click Exit.
7 Click OK.
8 Click Exit.