Cisco Headend System Release 2.7 Installation Guide
Chapter 1 Initial Installation of RNCS Software
34
78-4021167-01 Rev D
Adding the Headend
Now that you have added the RNCS to the ISDS, complete the following steps to
configure the headend on the RNCS.
1 From the ISDS Administrative Console, click the Element Provisioning tab.
2 Click Headend. The Headend Summary window opens.
3 Click Add Headend. The Headend Summary window opens with a new, blank
1 From the ISDS Administrative Console, click the Element Provisioning tab.
2 Click Headend. The Headend Summary window opens.
3 Click Add Headend. The Headend Summary window opens with a new, blank
row.
4 Enter the following information:
Headend Name—A unique name for this headend.
Headend ID—A unique number identifying this headend.
Site Name—Select the site this headend is associated with from the list.
5 Click Save. A confirmation message appears.
6 Click OK on the confirmation message.
7 Click Exit.
8 Add the new headend to your network map.
6 Click OK on the confirmation message.
7 Click Exit.
8 Add the new headend to your network map.