Cisco Headend System Release 2.7 Installation Guide
Appendix B
Troubleshooting
82
4022447 Rev B
Use the following procedure to run the Doctor Report on the DNCS.
1 If necessary, open an xterm window on the DNCS.
2 Type cd /dvs/dncs/Utilities/doctor and press Enter. The
1 If necessary, open an xterm window on the DNCS.
2 Type cd /dvs/dncs/Utilities/doctor and press Enter. The
/dvs/dncs/Utilities/doctor directory becomes the working directory.
3 Type doctor and press Enter. The system generates a list of parameters that you
can use to run the Doctor Report.
Note: Each parameter causes the Doctor Report to generate output with specific
configuration information.
Note: Each parameter causes the Doctor Report to generate output with specific
configuration information.
4 To generate a complete Doctor Report, type doctor -av and press Enter.
Results:
The system generates the Doctor Report listing all system configuration
information and directs the output of the report to the screen.
information and directs the output of the report to the screen.
The system also saves the output of the Doctor Report to a file in the current
directory on the DNCS.
directory on the DNCS.