Cisco Headend System Release 2.7 User Guide
Set DNCS Tracing or Logging Levels
4031374 Rev B
229
Set DNCS Tracing or Logging Levels
Before you can begin using the signonCount utility, you need to set the tracing or
logging levels of three DNCS processes. By setting the tracing or logging levels for
these processes, you ensure that the DNCS captures the maximum level of detail for
these processes.
logging levels of three DNCS processes. By setting the tracing or logging levels for
these processes, you ensure that the DNCS captures the maximum level of detail for
these processes.
Note: The processes are hctmConfig, hctmMac, and hctmProvision.
The procedure you use to set the tracing or logging levels depends upon the version
of system software running on the DNCS. Select one of the following options:
of system software running on the DNCS. Select one of the following options:
For system software earlier than SR 4.3, go to Setting the DNCS Tracing Levels
(on page 229).
(on page 229).
For SR 4.3, go to Setting the DNCS Logging Levels (on page 200).
Setting the DNCS Tracing Levels
Follow these instructions to set the tracing levels of the hctmConfig, hctmMac, and
hctmProvision processes to level 2.
1 From the DNCS Administrative Console, select the Utilities tab.
2 Click Tracing. The DNCS Tracing Management window opens.
hctmProvision processes to level 2.
1 From the DNCS Administrative Console, select the Utilities tab.
2 Click Tracing. The DNCS Tracing Management window opens.
3 Scroll down until the hctmConfig, hctmMac, and hctmProvision processes come
into view.