Cisco Headend System Release 2.7 User Guide
Chapter 19 Assign the Set-Top Host to a Download Group with the cronCVT Utility
250
4031374 Rev B
HWID=4300,43
HWID=5000,10
HWID=8300,63
croncvt.ini (with -c and the S25 stack)
Important: When using the -c option with the S25 stack, be sure to comment out, or
delete, references to the hardware ID (HWID) parameters from this file.
delete, references to the hardware ID (HWID) parameters from this file.
#This is a comment
#you may place as many comments in this file as you want.
#the comment line must begin with an #
#
# Package to Group assignment:
# The tool supports two packages and two CVT groups
# assignment. Once it has been determined that a
# given CableCARD has received PKG1 or PKG2,
# the tool will assign the Host that is bound to
# the CableCARD to the CVT Group ID GRP1 or GRP2
# respectively.
# When using the S25 option, comment out or
# delete the HWID parameters from this
# config file.
# First Package and CVT group assignment
S25PKG1=S25
S25GRP1=999
# Second Package and CVT group assignment
S25PKG2=Brick
S25GRP2=999