Cisco Headend System Release 2.7 User Guide
The cronCVT Configuration File
4031374 Rev B
251
croncvt.ini (with -r)
#This is a comment
#you may place as many comments in this file as you want.
#the comment line must begin with an #
#
# Package to Group assignment:
# The tool supports two packages and two CVT groups
# assignment. Once it has been determined that a
# given CableCARD has received PKG1 or PKG2,
# the tool will assign the Host that is bound to
# the CableCARD to the CVT Group ID GRP1 or GRP2
# respectively. Only certain Hardware IDs specified
# in the Hardware Id Section will be affected.
#
# First Package and CVT group assignment
PKG1=tru2way
GRP1=7779
# Second Package and CVT group assignment (Not used with -r)
#PKG2=SARA
#GRP2=1234
# Hardware IDs (Type,Revision)
#HWID=8300,63
HWID=4300,43
HWID=5000,10
HWID=8300,63
croncvt.ini (with -z)
#This is a comment
#you may place as many comments in this file as you want.
#the comment line must begin with an #
#
PKG2GRP=CleanScreen1,1111
PKG2GRP=CleanScreen2,2222
PKG2GRP=CleanScreen3,3333