Cisco Headend System Release 2.7 Installation Guide
Attach Mirrors
4012763 Rev B
23
Attach Mirrors
In this procedure, you will log in to the Sun Fire V240 server and enable the disk-
mirroring function of the server. Complete the following steps to log on to the Sun
Fire V240 server and then to attach the server’s mirrors.
Attaching Mirrors
Note: It may take up to 20 minutes to complete this process.
1 Log on to the Sun Fire V240 server as root user.
2 Type cd /cdrom/cdrom0/s0/sai/scripts and then press Enter. The
1 Log on to the Sun Fire V240 server as root user.
2 Type cd /cdrom/cdrom0/s0/sai/scripts and then press Enter. The
/cdrom/cdrom0/s0/sai/scripts directory becomes the working directory.
3 Type ./V240_attach_mirrors and then press Enter. A confirmation message
appears.
4 Type y (for yes) and then press Enter. The system runs a script that enables the
disk-mirroring function of the Sun Fire V240 server.
5 When the mirrors have been enabled, type exit and then press Enter. The root
user logs out of the Sun Fire V240 server.
Suggestion Regarding the RNCS Software DVD
Leave the RNCS software DVD in the DVD drive of the Sun Fire V240 server. You
need the DVD in place in case you ever have to reboot the server or re-install the
software.