Cisco Headend System Release 2.7 User Guide
Appendix D
Configuring Sources for Secondary BFS QAMs in a Distributed BFS System
96
4024447 Rev C
Adding BFS Sources - Sites Using a BFS BIG
Complete the following procedure if your DNCS uses a BFS BIG to distribute the
BFS carousel data.
1 Confirm that the BFS sources are enabled for SDV services. Refer to Confirm the
BFS carousel data.
1 Confirm that the BFS sources are enabled for SDV services. Refer to Confirm the
BFS Source for Switched Digital Services (on page 7) for details.
2 Open the Set Up BIG window by following the quick path:
DNCS Administrative Console > Network Element Provisioning tab > BIG >
File > Open
File > Open
3 Click PAT Configuration to open the BIG PAT window.
4 Verify the BIG PAT Session Number and Program Number data, making sure
4 Verify the BIG PAT Session Number and Program Number data, making sure
that your Program Numbers are sequentially in order and in line with the
Session Numbers.
Note: Your DNCS sessions 2 through 22 should not change; however, DNCS
sessions greater than 22 must be deleted and reentered with the correct
sequential Program Number.
Example: BIG PAT Session Number and Program Number Data (Program
Numbers in Sequential Order and in line with Session Numbers)
Session Numbers.
Note: Your DNCS sessions 2 through 22 should not change; however, DNCS
sessions greater than 22 must be deleted and reentered with the correct
sequential Program Number.
Example: BIG PAT Session Number and Program Number Data (Program
Numbers in Sequential Order and in line with Session Numbers)
Session Number
Program Number
2
128
4
129
6
130
8
131
10
132
12
133
14
134
16
135
18
136
20
137
22
138
24
139
26
140