Cisco Headend System Release 2.7 User Guide
Adding BFS Sources - Sites Using a BFS BIG
4024447 Rev C
97
Session Number
Program Number
28
141
30
142
32
143
199
144
Important: Cisco recommends that you go ahead and add all SDV sources 24
through 32 to reduce the number of times that the PAT Configuration table has
to be edited.
through 32 to reduce the number of times that the PAT Configuration table has
to be edited.
5 After the SDV sessions are built, if the sessions are not immediately utilized, then
disable the DNCS ATM source by following the quick path:
DNCS Administrative Console > Application Interface Modules tab > BFS
Admin > select DNCS > File > Select > Sources tab > select source to be
modified > File > Open > set source to Disable > Save
DNCS Administrative Console > Application Interface Modules tab > BFS
Admin > select DNCS > File > Select > Sources tab > select source to be
modified > File > Open > set source to Disable > Save
6 Once the PAT Configuration Table has been modified, update any secondary
BFS QAMs by tearing down any session greater than 22 and rebuilding the
session with the correct Program Number.
session with the correct Program Number.