Cisco Headend System Release 2.7 User Guide
Required Network Data
4024447 Rev C
3
Required Network Data
Overview
To successfully provision the DNCS for SDV services, you need detailed network
data for the SDV server, Netcrypt Bulk Encryptor, edge resource (for example,
GQAM), and mini-carousel for each SDV configuration.
data for the SDV server, Netcrypt Bulk Encryptor, edge resource (for example,
GQAM), and mini-carousel for each SDV configuration.
This section provides tables to conveniently store the network data to help simplify
the provisioning process.
the provisioning process.
SDV Server
The SDV server provides high-speed channel change services for the SDV system
and can be set up to use the following protocols:
and can be set up to use the following protocols:
CCP protocol (Channel Change)
MCP protocol (Mini Carousel)
HTTP protocol (Web client)
DSP protocol (Database Sync)
SNMP Agent protocol
When configuring the SDV server, as well as these protocols, use one of the
following three options to define which Ethernet ports are utilized:
following three options to define which Ethernet ports are utilized:
Option 1: All SDV protocols are located on one physical interface (eth0).
Option 2: Management is used on a separate interface, HTTP on eth1; all other
protocols are configured on eth0.
protocols are configured on eth0.
Option 3: The Mini Carousel is on a separate interface, eth1; all other protocols
are configured on eth0.
are configured on eth0.
Note: Refer to Series D9500 Switched Digital Video Servers Installation and Operation
Guide (part number 4012584) to see procedures for setting up which protocols go out
on which ports.
Guide (part number 4012584) to see procedures for setting up which protocols go out
on which ports.