Cisco Headend System Release 2.7 User Guide
Chapter 1 Before You Begin
4
4024447 Rev C
Fill in the values for the fields listed in the following table. These values will be used
to provision the DNCS for SDV services.
to provision the DNCS for SDV services.
Field
Your Value
Name of SDV Server
VASP IP Address
Note: This IP address is always the address
on eth0 interface.
on eth0 interface.
Netcrypt Bulk Encryptor
The Netcrypt Bulk Encryptor is a device that receives SDV content from the Digital
Content Manager (DCM) staging processor. Fill in the values for the fields or
interfaces listed in the following table. These values will be used to provision the
Netcrypt Bulk Encryptor on the DNCS.
Content Manager (DCM) staging processor. Fill in the values for the fields or
interfaces listed in the following table. These values will be used to provision the
Netcrypt Bulk Encryptor on the DNCS.
Note: It is recommended that each gigabit Ethernet port be assigned to a different
point-to-point subnet using a /30 subnet mask.
point-to-point subnet using a /30 subnet mask.
Field/Interface
Your Value
Netcrypt Name
ethA
(Management)
Interface
(Management)
Interface
MAC Address
IP Address
Subnet Mask
Default Gateway
Gigabit Ethernet
Port 1 (GbE)
Port 1 (GbE)
MAC Address
IP Address
Subnet Mask
Default Gateway
Gigabit Ethernet
Port 2 (GbE)
Port 2 (GbE)
MAC Address
IP Address
Subnet Mask
Default Gateway