Cisco Headend System Release 2.7 User Guide
Chapter 2 Provisioning SDV Services on the DNCS
20
4024447 Rev C
7 Do you need to create an additional SDV server or backup SDV server?
If yes, click the SDV Server List link from the top area of the window and
then repeat steps 3 through 6.
then repeat steps 3 through 6.
If no, click Exit to close the Switched Digital Video (SDV) Server List
window.
window.
Provisioning Alarms for an SDV Server
Important: You must set the Alarm Threshold for Alarm ID 6 and Alarm ID 100 to 1
as they directly relate to the Resource Fail Threshold and the Resource Alarm
Threshold values defined for the SDV Server software. For details about the SDV
Server software, refer to the Series D9500 Switched Digital Video Servers Installation and
Operation Guide (part number 4012584).
as they directly relate to the Resource Fail Threshold and the Resource Alarm
Threshold values defined for the SDV Server software. For details about the SDV
Server software, refer to the Series D9500 Switched Digital Video Servers Installation and
Operation Guide (part number 4012584).
When provisioning alarms for an SDV server, you can define the severity of an
alarm level (for example, a major alarm or a critical alarm), as well as the maximum
number of instances an event can occur until an alarm situation exists. This section
describes how to provision specific SDV alarms for an SDV server.
1 From the SDV Server List window, click Alarm Provisioning. The SDV Server
alarm level (for example, a major alarm or a critical alarm), as well as the maximum
number of instances an event can occur until an alarm situation exists. This section
describes how to provision specific SDV alarms for an SDV server.
1 From the SDV Server List window, click Alarm Provisioning. The SDV Server
Alarm Provisioning window opens and describes each alarm type by an ID
number and a description.
number and a description.